There is a special bracket that bolts to the bottom two bolts of the
tranny, and the strap goes from that, over to a hole on the pan, to
ground.
On 8/20/06, Bill Hunt <Billh@aaai.com> wrote:
> I've discovered I need adjustment shims/spacers in the trunnion. I'm sure I
>read about them but forgot until now as I'm putting everything together. I
>don't see these listed in the usual suspects catalogs. Can these be made from
>shim stock or can something else be used/adapted? Anybody have any lying
>around? :)
>
> I have another question on the ground strap. I bought a new one since mine is
>very frayed. Mine is attached to a slave cylinder bolt and is very short. The
>new one is longer so it seems it should be attached elsewhere. Where is it
>supposed to attach to?
>
> Herby
> 63 MKII Sprite (Herbytoy - patiently waiting)
> 62 MKII Sprite (the "resto-mod" driver, awaiting the new front suspension)
> 00 Dakota R/T (the new toy)
> herby@herbytoys.com
> www.herbytoys.com
--
www.myspace.com/tequilabrad
|