Yes! I was speaking of the threaded end. Thanks for the bit of hope and
good will though, Hal!
I have started applying penetrating oil to it. Everyday for a week or so
should do it, eh?
=D
----- Original Message -----
From: "David Lieb" <dbl@chicagolandmgclub.com>
To: "Hal Faulkner" <hal@katemuir.com>; "Spridgets"
<spridgets@autox.team.net>
Sent: Sunday, August 13, 2006 8:34 PM
Subject: Re: 71 Midget Trunion Pin Wear
>> Removal of tie rod ends is EASY as I learned at the Buster Cluster.
>> Using a
>> BFH smack the end of the steering arm along the axis of the arm. Done
>> right
>> and the tie rod end will fall out! Wouldn't have believed it if I hadn't
>> seen it with my own eyes!
>
> Unfortunately, Hal, his complaint appeared to be at the threaded
> end, rather than the steering link end.
> Lots of penetrating fluid and time, I suppose...
> David Lieb
> 1972 Blue
|