Forgot to snip the trailer...
Did you check for vacuum leaks?
On the pistons, pull the dampers and the air filters (engine off) and lift
the piston in each carb with a finger. I fit drops smoothly and lands with
a "click" at the bottom when you let go, you're fine. If it hangs up, drags,
doesn't drop smoothly, you have a problem. If it's seems a little sticky,
try it again without the springs in the dashpots. If it's bad with the
springs, it'l be worse without.
Chris K.
On Tue, 1 Mar 2005 10:17:16 -0800, Mike Aarset wrote
> Hi new to this list.
>
> Having some trouble with my frogeye.
> It has a 948 with HS-2 carbs.
>
> I syncd the carbs and set the fuel air mixture.
>
> But the car won't idle down.
>
> Come to a stop sign and the car is idleing at
> 1500 RPM for like a minute and then it settles down.
>
> If I keep the car in gear and push in the clutch around 800 RPM
> just before I come to a stop then it idles normal. I think something
> is fishy with my slides..
>
> Any ideas?
>
> Mike
> Sacramento, ca
>
> Your messages not reaching the list?
> Check out http://www.team.net/posting.html
|