Re: "bog" or "flat spot" on initial (off-idle) acceleration 2004 08:10:24 -0700

You're not going to like this answer...

Chassis dyno is the (easiest) way to go
on this for correct advance curve for
a specific engine.

There is another way to go that will put
you pretty much reasonably in the ballpark, though.

Aldon (England) has about every state
of tune for Series A motors (and I assume
for 1500 also since this uses a Lucas
dizzy as well) ever developed.

They produce the generic "yellow" and
"red" distributors sold by Moss, MiniMania, etc.

Aldon Automotive...on the www. :)




Cap'n. Bob 
     '60 :{)