Mark
I'm running with the top 3 leaves removed. I made spacers from the removed
leaves and have tried them on top and on the bottom. No difference with or
without them in either position. In fact I currently have them on the bottom
on the right side (removed the left side and got side tracked) and none at
all on the left side. Makes no difference in ride quality, ride height or
handling.
Larry Miller
----- Original Message -----
From "Hanna, Mark" <mhanna at ball.com>
To: <spridgets@autox.team.net>
Sent: Tuesday, September 30, 2003 3:46 PM
Subject: Go fast suspension set up
> -Thanks Jackson,
> After removing the 3 shortest rear leaves did you install a like thickness
spacer into the spring mount. And did this spacer need to be placed on top
of the spring stack or below it ?
> I think Chuck Christ mentioned using Jeep CJ-5 spring alignment wedges ???
for this purpose awhile back. Also you mention running 340 Lb. front
springs. What was the stock front spring value for 1/4 elliptic cars ?
> Thanks again,
|