In a message dated 10/24/2000 11:06:50 AM Eastern Daylight Time,
Ajhsys@aol.com writes:
<< I doubt that furnace cement would be a flammable composition, but if it is
cheaper than Pyro Putty, and works as well, you may be able to market it!
Pyro Putty is a two part, epoxy like material. It takes a long time to cure.
Let us know how the cement holds up. >>
I ran the car to work and back, as usual, today, about 40-50 miles total.
Raised the bonnet when I got home this afternoon and eyeballed the furnace
cement patch. It was still there, working, and had turned a gray color that
made it hard to spot--looked like part of the manifold. It was too hot to
poke around on, but it sure did look good.
--David C.
|