Carol,
I just got around to doing this myself a couple weeks ago. If you have the
same spin-on adapter I have (sounds like it), I simply removed the old
cannister and replaced it with the spin-on head. You'll need shorter bolts
and a new gasket, but that was about it. Yes, the oil return pipe fit right
in too. Much nicer!
Gerard
At 6:26 PM -0700 6/3/99, carolien coulter wrote:
>Hi gang,
>I finally can't stand it anymore and am going to change my oil filter on the
>Bugeye to a spinon.I already have one, a Puralator. So that I know what I'm
>getting into.Do I leave the adapter piece that is on there now ( between the
>engine and the filtertop-this is a Puralator) on there or does that come
>off. I seems that it should stay on so the oil return pipe will fit right
>into the top of the spin on top/ Thanks, Carol '59 Bugeye
G G Gerard Chateauvieux
E A
R R pixelsmith@gerardsgarage.com
A A
R G Pixelsmith on Duty
D E
S http://www.gerardsgarage.com
|