In a message dated 5/25/99 10:24:02 PM EST, macleans@earthlink.net writes:
<< I knew I should have gone to work today. >>
Mike:
Some days things just bung up it seems. I have hit a wall with my welding
and it seems that when I go to my shop nowadays I flit about like a whirling
dervish looking for something significant to do and end up only piddling. No
progress.
The gasoline line leading into the tank? When I attempted to remove my line
from the tank by unscrewing that fitting everything broke off down in there.
I solved the problem by cutting a short piece of fuel line that would either
slip over or into (don't remember which--that was about 2 years ago) the
outlet hole and completely filling the crevice with epoxy. It is solid and
leakproof. I will couple it with a short length of gasoline hose and a
couple of clamps. Sounds like you were able to save the fitting so you may
not be as desparate as I was. 8^)
--David
|