Re:Radio Noise

[Chuck Ciaffone <chuckc@ibm.net>]

OK, still got the noise.

I have Champion RN9YC plugs (resistor plugs, right?)
I have copper core (non-resistor) wires
I ran a direct ground from the radio ground wire to
  the battery neg terminal

I still get statis -- ignition noise -- crackling that
increases with rpms

Should I:

A. Get resistor wires -- will they work in the dizzy cap
   that has the wires on the side, with wires being held in
   by set screws?

2. Get a Radio Shack in-line noise supressor (low-pass filter?) a la
   Crash's suggestions?

chuck