Daryl,
Try pressurizing the system with an ezbleed pushing at the master cylinder,
or pulling a vacuum at the bleeder valves. Pumping won't cut it after a
rebuild.
see:
http://www.mgcars.org.uk/cambs.mgoc/tips.htm
for tips on how to make your own ezbleed. Took me about 15 minutes to build
after I collected the parts and another 15 to bleed all 4 brakes and the
clutch slave cylinder. This was after an entire weekend of bleeding every
way I knew, including pulling a vacuum and bench bleeding individual
cylinders.
Jeff
Jeff Boatright
Editor-in-Chief, Molecular Vision
http://www.emory.edu/molvis
"Seeing the Future in a Very Tiny Way"
|