spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE:1098 heads

from [John Colosimo] [Permanent Link][Original]
To: spridgets@Autox.Team.Net
Subject: RE:1098 heads
From: John Colosimo <jcolosim@exodus.lrcsb.lakeheadu.ca>
Date: Thu, 19 Feb 1998 09:10:03 -0500
Reply-to: John Colosimo <jcolosim@exodus.lrcsb.lakeheadu.ca>
Sender: owner-spridgets@Autox.Team.Net 
Hi,
One thing to check when using a 1098 head on a 948 is combustion chamber
volume.  I believe the 1098 head has a larger volume.  This would reduce
your compression ratio.  I think David Visards book talks about this.
John
60' & 64' sprites
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • RE:1098 heads, John Colosimo <=
Previous by Date:  Re: Midget Conspiracy?, J. Adrian Barnes
Next by Date:  Re: 1098 Head, Brian Evans
Previous by Thread:  Tranny/Convertible top frame questions, TRIPPY
Next by Thread:  1500 Midget questions, Nolan, Michael F.
Indexes:  [Date] [Thread] [Top] [All Lists]