Re: [Spits] Recommendations: dash / body parts / welding

[Doug Braun <doug@dougbraun.com>]

Like everybody says, get an auto-darkening helmet. 
Even a HF cheapo is better than nothing.

Also, the Spit's sheet metal is pretty thin, and the
thinner sheet metal is, the harder it is to weld. 
make sure you practice on some scraps of the same
thickness.

If you really must use flux-core, find the thinner
kind.  I think it is .030 instead of the standard
0.35"

Doug
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive