spitfires
[Top] [All Lists]

Re: [Spits] Timing chain cover nut

To: "OKCSpitfire" <OKCSpitfire@sbcglobal.net>,
Subject: Re: [Spits] Timing chain cover nut
From: "Gosling, Richard" <r.gosling@penspen.com>
Date: Tue, 8 Jan 2008 09:01:59 -0000
OKCSpitfire - sounds like you are getting a little frustrated!  I'll
avoid the temptation to get into a slanging match on the relative faults
of British and American cars ;-)  I have no idea why Triumph chose such
a random size for their pulley nut.

One method for loosening the nut is to remove a spark plug, and feed a
lenth of rope into the cylinder.  This jams the piston, and prevents the
crank from turning, so you can then turn the nut, preferably with a VERY
long extension bar!

Another (more brutal) method is to fit the socket and an extension bar
onto the nut, then hit the starter motor.

Having said all this, shortly after I had a (professionally)
reconditioned engine fitted to my Spit, I remember noticing the crank
nut was loose, so I returned to the shop that fitted it.  They had a
nightmare trying to shift the nut, it wouldn't move either way, tighten
or loosen.  I can't remember what sorted it in the end, but I think it
involved a lot of brute force.


Richard
  ________________________________________________________________________
This message (including any attachments) is confidential and may be
privileged. If you have received it by mistake please notify the sender by
return E-mail and delete this message from your system. Any unauthorised use
or dissemination of this message in whole or in part is strictly prohibited.
Please note that E-mails are susceptible to change.
The Penspen Group shall not be liable for the improper or incomplete
transmission of the information contained in this communication nor for any
delay in its receipt or damage to your system. The Penspen Group does not
guarantee that the integrity of this communication has been maintained or that
this communication is free of viruses, interceptions or interference.
The following UK companies within the Penspen Group and any electronic
communication sent on behalf of any of them, are subject to the provisions of
the UK Companies Act 1985;
PENSPEN HOLDINGS LIMITED (Company Number : 980600) Registered Office: 3 Water
Lane, Richmond, Surrey, TW9 1TJ Registered in England and Wales (VAT No; 239
7770 19)
PENSPEN LIMITED (Company Number: 584446) Registered Office: 3 Water Lane,
Richmond, Surrey, TW9 1TJ Registered in England and Wales (VAT No; 239 7770
19)
(Unipen, Penspen Integrity and Andrew Palmer & Associates are operating
divisions of Penspen Limited and Spencer & Partners and Pencol are trade names
of Penspen Limited)
MANCHESTER JETLINE LIMITED (Company Number: 2392093) Registered Office: 3
Water Lane, Richmond, Surrey, TW9 1TJ Registered in England and Wales (VAT No;
537 8635 08)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>