Re: 1980 Spitfire Head

["Ken C" <sdspitfire@hotmail.com>]

Won't be able to make the measurement untill next week. I am certainly 
curioius. Still think I remember   the machine shop saying something like 
1/4 inch. But, hell, I can barely remember breakfast  !!  :-)

Ken C



>
>If you pull off the valve cover, you can measure the height of the head.  
>If
>it is about 3-1/16" is is right around where I would expect it to be.  If 
>it
>is less than 3" I would be concerned.
>
>Joe


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org