It sounds like the correct thing to do is to measure the exact position of the
old bearing
before pressing it off the shaft. I checked three different Spit shop manuals,
and none of them described how to deal with this situation...
Doug Braun
'72 Spit
At 10:03 PM 1/16/2005 -0600, Larry Vaughan wrote:
>Hey Paul,
>
> I am in the same situation. I think the flinger distance from end of axle
>is important. The rest should be apiece of cake.
>http://www.ljvaughan.homestead.com/axlehub.html
>
>Larry
>
>----- Original Message -----
>From: "Paul Grafelman" <pdgrafelman@hotmail.com>
>To: <spitfires@Autox.Team.Net>
>Sent: Sunday, January 16, 2005 2:04 PM
>Subject: Hub to flange spacing
|