Jamin,
I recently put a set of lap belts in my Stag, and have the
reinforcing plates that came with the kit. If you need them,
let me know and I can drop them in the mail to you.
Cheers,
Doug
--
Doug Mitchell
mailto:dbmitch@peoplepc.com
'73 Spitfire 1500 - Celebrating 27 years of ownership.
'73 Stag - about to celebrate 1 year of ownership.
> -----Original Message-----
> From: Jeff McNeal [mailto:jmcneal@ohms.com]
> Sent: Tuesday, September 03, 2002 7:50 PM
> To: Dan Canaan; Jamin aka theshaggye; spitfires@autox.team.net
> Subject: Re: Seat belt anchor locations?
>
>
> I agree with Dan, but would say that the reinforcement plate
> is absolutely
> mandatory if the plate isn't already in place. The holes are
> about an inch and
> a half from the edge of the pan, just forward of the drainage
> channel that
> leads to the sills if I recall correctly.
>
> Take care,
>
> Jeff McNeal (San Diego)
>
> '68 Spitfire Mk3 frame off, bare metal project, aka "Mrs. Jones"
> '70 GT6+ "Accidental", eventual restoration project
> http://www.TotallyTriumph.net/spitfire/spitfire.shtml
> Join the TOTALLY TRIUMPH NETWORK!
> Forums, Photos, How-To's, Classifieds, Links & Triumph Merchandise
> http://www.TotallyTriumph.net
>
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
>
>
> ----- Original Message -----
> From: Dan Canaan
> To: Jamin aka theshaggye ; spitfires@autox.team.net
> Sent: Tuesday, September 03, 2002 3:36 PM
> Subject: Re: Seat belt anchor locations?
>
>
> At 03:26 PM 9/3/02 -0700, Jamin aka theshaggye wrote:
>
> >Where should the thirs anchor actually be located?
>
>
> Lower outside corner of each floor pan. There is/should be
> a reinforcement
> plate on the bottom of the tub at this location as well.
> If not, it is
> definately recommended as the thin sheet metal of the floor
> pan isn't up
> the task for seat belt use in an accident.
>
> -Vegaman Dan
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|