In article <001001c1f9fd$9c4208e0$d7090150@u8p1p8>, William Davies
<bill@rarebits4classics.co.uk> writes
>
>----- Original Message -----
>From: Michael Hargreave Mawson <OC@46thFoot.com>
>
>> Have you ever bought a replacement speedo drive cable? Same problem.
>> You can't get the pre-assembled cable through the grommet in the
>> firewall without removing the connection from one end.
> The trick is to remove the grommet and feed the cable through it,
>then feed the cable through the hole in the bulkhead - you can then
>slide the grommet into position,
I probably should have thought to buy a new grommet as well. There was
no way my old one was going to let the cable go through it - even off
the car (believe me, I tried for a *long* time...).
ATB
--
Mike
Michael Hargreave Mawson, author of "Eyewitness in the Crimea"
http://www.greenhillbooks.com/booksheets/eyewitness_in_the_crimea.html
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|