I wish I had thought of that!
And of course smear anti-seize lube all over the new bolt.
After 10 years, my replacement bolt is still greasy and shiny.
Doug Braun
'72 Spit
At 03:29 PM 5/3/02 , you wrote:
>I've had that happen, but used this system:
>
>The threaded end of the long bolt has a blunt tapered
>point machined onto the end.
>I used a long (36") steel pipe, and BFH (Big Ferrous
>Hammer) to drive the bolt out.
>The tapered end of the bolt keeps the end of the pipe
>centered.
>
>Carter Shore
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|