I put on some new carbs today (HS4s) - and started tuning them from scratch (ie
- i put everything back to zero and went from there) I cant seem to get my idle
speed lower than about 1000rpm. Ive followed the procedure in the haynes manual
- and also one in my triumph clubs magazine. I get to the point of balancing
the air intakes (im using the tube method) - and then adjusting the mixture -
but it then tells me to turn down the throttle screws until the idle speed does
down - but it doesnt do anything - they arent moving the levers.
Ive checked the throttle levers are going all the way closed - and pretty much
everything I can think of - with my limited mechanical knowledge.
Any suggestions?
James
1977 Pimento Red Spit
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|