So, the fuel guage starts reading "0" all the time. I
go to the trunk to hook up the wires that have fallen
off in the past and, lo and behold, the're where they
should be. I pull the guage and the VOM reads plus
voltage on the hot wire and a complete circuit on the
wire to the sensor. I also read about 65 ohlms accros
the guage. That means that everything should work,
but it dosen't. So I take apart the guage and look
inside for a mechanical source of failure but, alas, I
can find nothing obviously amis. Drat!!
Any suggestions?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
|