Hi Wizardz
There are two things I would look for, are the choke cams and associated
links to the jets free moving and are they returning to the off position and
make sure the throttle cable isn't holding the revs high, easy ways to check
both, one put a finger on the bottom of the jet and lift gently, and for the
other disconnect the link bar between the cable cam and the spindle that
connects to the carbs.
Graham.
2.5 PI MKII
Sprinted Dolomite
2000 MKI
Toledo
1300 Front Wheel Drive
http://www.triumph-iw.co.uk
>
>
> Alright! what aint' ah doin' right?
>
> New HS4's (no air leaks at shafts) new manifold gasket
> (all other gaskets as well)
> New clean setup of HS4's on a '75 Spit.
>
> With the idle stop screws almost all the way out I can't seem to get
> the idle down below 2krpm.
>
> One carb wants to float more than the other.
>
> What do I look for?
>
> wizardz
|