I got mine from Spitfire Spares in the UK. You'll find their site at:
www.users.globalnet.co.uk/~alecks
I think I paid about $15 for the manifold bracket & bellcrank and linkage.
Tony Childs
72 Spitfire - FK38809U
----- Original Message -----
From: Ron Roach <rroach@direct.ca>
To: spitfires <spitfires@autox.team.net>
Sent: Tuesday, November 23, 1999 2:29 PM
Subject: HS4 hardware
>
> Hi Listers!
> I'm running a pair of HS4's on my 1500, but the cable bracket is a home
made
> job that's never worked properly. The bonnet always fouls the cable and
> ends up cracking the outer "spaghetti" and crimping the cable. End result
> is erratic and high idle speeds. I need the UK bracket or equivalent
that's
> at an angle to clear the bonnet. I guess I need the accompanying hardware
to
> connect the cable to the linkage as well. I can't seem to find this part
in
> any of my catalogues, or online. Has anybody else fabricated something
that
> would work, or know where i can get this stuff?
> Also looking for a used header.....
> Thx,
>
> Ron..'78 spit
>
|