Ron,
I just converted to twin SU H4's on my spitfire. I found the best source for
such parts to be Rimmer Brothers in England(they are on the web). They had all
of the throttle cables, choke cables and fuel line components that I required.
Get one of their catalogs, it is very informative and illustrates the parts
that you don't know you need.They take credit cards and the service is good.
Best Regards,
John Reynolds
1979 Spitfire FM966640
1967 BSA Spitfire A65SA16748
-----Original Message-----
From: Ron Roach rroach@direct.ca
Sent: Tue, 23 Nov 1999 11:29:21 -0800
To: spitfires@autox.team.net
Subject: HS4 hardware
Hi Listers!
I'm running a pair of HS4's on my 1500, but the cable bracket is a home made
job that's never worked properly. The bonnet always fouls the cable and
ends up cracking the outer "spaghetti" and crimping the cable. End result
is erratic and high idle speeds. I need the UK bracket or equivalent that's
at an angle to clear the bonnet. I guess I need the accompanying hardware to
connect the cable to the linkage as well. I can't seem to find this part in
any of my catalogues, or online. Has anybody else fabricated something that
would work, or know where i can get this stuff?
Also looking for a used header.....
Thx,
Ron..'78 spit
Get Visto.com! Private groups, event calendars, email, and much more.
Visto.com. Life on the Dot.
Check it out @ http://www.visto.com/info
|