spitfires
[Top] [All Lists]

Re: Slave cylinder question

To: PABowen@sar.med.navy.mil, spitfires@autox.team.net, kstewart@wwdc.com
Subject: Re: Slave cylinder question
From: Metallian6@aol.com
Date: Thu, 28 Oct 1999 17:31:56 EDT
Thanks guys. Just wanted to be sure. With that in mind it won't cost as much 
to get Judas fixed. I would still like to drive Judas to Wisconsin. If I can 
get these few minor repairs done soon then I might be able to. Also I pulled 
the fuel sending unit off to find half the plastic float filled with gas. I 
don't know how it got in there cause I've turn the float every which way and 
nothing comes out. I received more good news when I found out that you have 
to buy the whole sending unit just to get the float. That's VB anyway, $50.00 
isn't to bad for a new sending unit. But anyway thanks again for the info, 
I'll rebuild that puppy and save my wallet from a total nervous breakdown. :-)

Jamie
1979 Spitfire 1500 "Judas"
1962 AH Sprite MKll
Web site link:  <A HREF="http://www.angelfire.com/fl2/darkside/mycar.html";>Wel
come to my british car site</A> 

<<Rebuild that puppy and save yourself $80!!!

Patrick Bowen>>

<<Sounds like a perfect candidate for rebuilding. Even with a bit of MINOR
pitting, these can be honed....although I do not like the idea of removing
the protective finish surface. However, this sounds perfect for a rebuild. 
Go for it!!

Cheers
Keith>>

<Prev in Thread] Current Thread [Next in Thread>