Yes. THat's how it's connected on my Midget. One port off the side of the
carb with a tee. One going to the EGR valve, and the other to the vacuum
advance
__/__,_
_____(_o___o_)_______________________
/ \
| Michael Graziano |
| Long Term Capital Management L.P. |
| Phone: 203-552-5706 |
| Fax: 203-552-5869 |
| Email: mgrazian@ltcm.com |
\_____________________________________/
-----Original Message-----
From: rhill [mailto:hill@mninter.net]
Sent: Thursday, August 05, 1999 9:15 AM
To: spitfires@autox.team.net
Subject: ZS 150CD vacuum advance....
Just received a rebuilt Z-S 150CD and I am having the following problem:
There isn't a connection for the vacuum advance. There should be a
connection on the bottom of the carb for this (there is, however, a
brass plug where the connection should be).
This leads to the following question: Can the vacuum advance be
connected to the same port as the EGR valve? (the top port?), or should
I just return the carb to the vendor?
Thanking you in advance,
Bob Hill
|