>I have the Eastwood spot weld cutter with the center guide and it is OK but
>occasionally the center guide gets stuck in the retracted position and I
>have to take it apart. I bought the other cutter but have not yet tried it
>out--I will let you know how it does in the next few days.
********************************************
Yep, I had the same problem with mine. I even ordered the replacement tips
etc. but it's just a shortcoming with the tool. This is however the best
cutter for the job. I have replace (and removed) both floors, sills inner
and outer, both rear wings, rear valance, and soon will be replacing both
front wings on the project 70 Spitfire with this same tool. Don't bother
with the other one. I tried the other tool and was quite disappointed with
the results-
Barry Schwartz (San Diego) bschwart@pacbell.net
72 V6 Spitfire (daily driver)
70 GT6+ (when I don't drive the Spit)
70 Spitfire
|