I purchased a 1975 spit over the weekend after about 10 minutes of
conversation with a friend. It's kinda neat story and I'll probably bore
you all with it soon. However, to the problem at hand. The rear brakes are
real "iffy" at best. I went to look at the shoes and, while one of the
screws hold the drum on backed right out, the other wond budge. I gave it a
couple of blasts of PB Blaster and put a screwdriver with a wrench on it and
it bent the screwdriver. Any ideas out there. I'm wondering if I need to
drill out the center and use an "easy out", never actually used one of those
things. Try heat. I don't know, give me an idea. Thanks a lot.
Chris DeStaffany
1966 Herald in a zillian pieces
1975 Spit on a jack with three tires
|