I would just replace both sensors.
Likely less than $100 at AutoZone.
Get the ones with the shortest wires, which are for your MTX.
regards, Jim White
At Thursday, 07 September 2006, jfkoper1@aol.com wrote:
>Hello all,
>
>My CE light started glowing solid about on the return trip from
the convention.
>I pulled the codes using a jumper wire and got the following (KOEO):
>
>175 No HEGO switching detected / adaptive fuel at limit (LH).
> 176 HEGO sensor indicates system lean (LH).
>
>Does this most likely point to a bad O2 sensor on the firewall side of
>the engine? I can test the old one and what not, but are there
any other
>items besides O2 sensors to look for? They were replaced about 70-80K
>ago. I don't have the codes for the KOER part of the test.
>
>Thanks.
>
>Jim Koper
>92
>166K
>________________________________________________________________________
>Check out AOL.com today. Breaking news, video search, pictures, email
>and IM. All on demand. Always Free.
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|