I used an acid-based stain on my shop floor about 5 years ago but never got
around to adding the sealing coat to it. About 2 years ago I bought some
GhostShield 4500 but havenâ??t put it down yet. I hope to get to it in the next
few months.
Peace,
Pat
Pat Horne
We support Habitat for Humanity
On Jan 19, 2023, at 11:37 AM, Jeff Scarbrough <fishplate@gmail.com> wrote:
Hi all... I've decided to coat my garage floor with something - the
bare concrete just sheds too much dust to consider the garage "clean".
Every time I sweep, it looks like Pigpen from the Peanuts comics.
I can hire a painting contractor to come in and do the job, but it
would be a lot easier on me if I could do half at a time (shifting all
the boxes and benches from half to half), but I expect that would
increase the cost of the contractor. So, are there good DIY solutions
to garage floor coatings? I'm not as concerned about the aesthetics
of the seam where the coatings overlap - anything is better than what
I've got.
Associated question: The original builders put some gouges and
craters in the floor. Nothing too big, but maybe there's a successful
way to fill them before coating?
-- Jeff
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|