[Top] [All Lists]

Re: [Shop-talk] Square D QO breaker Box

To: Jack Brooks <>
Subject: Re: [Shop-talk] Square D QO breaker Box
From: David Scheidt <>
Date: Tue, 13 Apr 2021 21:57:42 -0500
Cc: Shop Talk <>
References: <>
On Tue, Apr 13, 2021 at 6:39 PM Jack Brooks <> wrote:
> I am building a Sprinter van into an RV and have a question about the 120v 
> breaker box (SquareD QO24L70RBCP).  It is a 2-Space, 4-Circuit load center.  
> My concern is that while the Neutral bar has four positions on a common bar, 
> the two breaker connections are independent, without a common bar between the 
> two.  This surprised the heck out of me. My inverter (Victron 24/70/3000)  
> has a single AC output with a â??cage clampâ?? terminal, not a screw down or 
> stud terminal which would be easy. I can run a 6 or 8 AWG from the inverter 
> to the Breaker box, but it needs to go to the two separate screw down 
> terminals.  Physically, I believe I can run an 8 AWG wire into one breaker, 
> and then back out to the other breaker, but Iâ??m concerned about whether 
> this is a code violation.

Ccan you post a picture of the inside of the box? I'd like to see the
bus baring.

David Scheidt
Suggested annual donation  $12.96


<Prev in Thread] Current Thread [Next in Thread>