[Top] [All Lists]

Re: [Shop-talk] Miter saw blade for plastic tiles

To: Mike Rambour <>, Shop Talk <>
Subject: Re: [Shop-talk] Miter saw blade for plastic tiles
From: John Mitchell via Shop-talk <>
Date: Tue, 12 Nov 2019 13:17:28 -0500
References: <> <> <>
User-agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:68.0) Gecko/20100101 Thunderbird/68.2.2
I've had some tiles down for 2 years and suddenly they started to curl 
up around the edges.  I installed them with plenty of gap for 
expansion.  I sent "Garage Floors" pictures and suddenly I had a 
delivery of all new tiles.  I assume others may have had similar 
problems with that batch.  Did you ever stick a hot dog into the saw stop?

On 11/12/2019 11:09 AM, Mike Rambour via Shop-talk wrote:
>  I cut mine on my table saw with my regular wood blade, there was some 
> melting but not much.  Other tiles I cut with my sabre saw.
>  I remember reading where someone suggested putting the saw blade on 
> backwards to cut Racedeck, but my saw (Sawstop) wont work with the 
> blade backwards so I never even tried.
>  You are going to love the tiles, had mine about 15 years now, just be 
> careful when you weld or use your plasma cutter :)
>     mike
> On 11/10/2019 4:18 PM, John Mitchell via Shop-talk wrote:
>> I'm putting down racedeck type garage tiles and I'm wondering what 
>> the best blade is for my miter saw.  Should I get the finest tooth 
>> blade I can find or will a 60 tooth 12" blade suffice?
>> _______________________________________________
>> Donate:
>> Suggested annual donation  $12.96
>> Archive: 
>> Unsubscribe/Manage: 

Suggested annual donation  $12.96


<Prev in Thread] Current Thread [Next in Thread>