I cut mine on my table saw with my regular wood blade, there was some
melting but not much. Other tiles I cut with my sabre saw.
 I remember reading where someone suggested putting the saw blade on
backwards to cut Racedeck, but my saw (Sawstop) wont work with the blade
backwards so I never even tried.
 You are going to love the tiles, had mine about 15 years now, just be
careful when you weld or use your plasma cutter :)
   mike
On 11/10/2019 4:18 PM, John Mitchell via Shop-talk wrote:
> I'm putting down racedeck type garage tiles and I'm wondering what the
> best blade is for my miter saw. Should I get the finest tooth blade I
> can find or will a 60 tooth 12" blade suffice?
>
>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk
> http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/lists@dinospider.com
>
--
A gun is like a parachute, if you need one but don't have it,
you'll probably never need one again.
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|