shop-talk
[Top] [All Lists]

Re: [Shop-talk] Enclosed car trailer

To: Shop Talk List <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Enclosed car trailer
From: David Hillman <hillman@planet-torque.com>
Date: Tue, 8 Sep 2015 23:59:57 -0400 (EDT)
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <CADm3DLENw0Y5fMfp29=DUDCdrMs_W+2jxEsm8q8odGAY0cA1Jg@mail.gmail.com> <alpine.BSF.2.02.1509081918210.80155@itonami.pair.com> <CADm3DLEHEWeJunO4OpOpybgR2zs9XWbvsZuPEw2jWNL5uMVY3w@mail.gmail.com>
User-agent: Alpine 2.02 (BSF 1266 2009-07-14)
On Tue, 8 Sep 2015, Brad Kahler wrote:
> I can see where 3-track would be a problem considering what you're
> transporting.  Seems like the responses I've been getting favor D-rings
> over e-track for vehicle tie down.  Maybe I should learn something here :)

    Really the only reason for floor e-track is to haul a variety of 
things.  If this is only going to be a mobile TR6 garage, I see no 
point at all.  Put d-rings where you need them, and be done with it.

> I've never owned or used a trailer with the torsion springs which is why
> I'm interested in the difference.  I think it's something like a $300
> adder.  Your comments about trailer width pretty much indicate I should go
> with the 8'-6" trailer width.  Makes sense.

    I've had both axles.  The difference isn't night and day or anything, 
but torsion is preferred.  Some of the torsion advantages -- like say 
being quieter -- you may or may not care about.  On the other hand, if you 
only plan to keep a trailer a short time, maybe you don't care that leaves 
rust out and need replacing.  Generally it's +$300 for torsions, or thereabouts.

    Regarding width, about the only reasons to go skinny are storage room, 
and reduced frontal area ( ie mileage )... but if you are towing with a 
motorhome, neither of those probably matter to you.

--
  David Hillman
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>