[Top] [All Lists]

Re: [Shop-talk] 4-post lift thoughts

To: Brad Kahler <>
Subject: Re: [Shop-talk] 4-post lift thoughts
From: Larry Spector <>
Date: Wed, 14 Jan 2015 14:21:16 -0500
Cc: Shop Talk List <>
References: <> <> <> <> <> <> <> <> <>
I went with the bend-pak aluminum ramps:

they're light enough to just pick up and move out of the way.


On Wed, Jan 14, 2015 at 2:15 PM, Brad Kahler <> wrote:

> Ok, next issue with the 4-post lift.  The in-feed ramps on my lift were
> fixed ramps (welded to the platforms) and were only about 16" long.  That
> made for a pretty steep angle.  Matter of fact the Spitfire race car
> couldn't get started up the ramps because of the slick shop floor, the
> tires just spun on the concrete.
> I've already cut those ramps off and am trying to figure out what would
> work the best as a replacement.  Right now I'm leaning towards fabricating
> ramps that are significantly longer but are not fixed to the platforms.  My
> thought is to possibly have them attach with a pin of some sort which would
> allow me to remove them so they can be moved out of the way once the lift
> is up in the air.
> I don't think I would like having them pivot down as they would just be in
> the way and I had previously hit my head on the original ramps enough times
> to know I don't like them sticking out!
> Thoughts?
> _______________________________________________
> Donate:
> Suggested annual donation  $12.96
> Archive:
> Forums:
> Unsubscribe/Manage:

<Prev in Thread] Current Thread [Next in Thread>