[Top] [All Lists]

Re: [Shop-talk] Sanding cylinders on drill press

To: <>, "Lee Daniels" <>
Subject: Re: [Shop-talk] Sanding cylinders on drill press
Date: Sat, 16 Feb 2013 17:11:41 -0500
User-agent: Webmail 4.0 a=vFMCQZgPscsA:10 a=OxA2fI3fvqkA:10 a=P2oOn6vrs4wA:10 a=GPr01A5e9VcA:10 a=IkcTkHD0fZMA:10 a=QiQcBifw3rKpjI8epQikPQ==:17 a=xdmlJVf0AAAA:8 a=icP9HOiJ77bKha3whhYA:9 a=QEXdDO2ut3YA:10 a=s7wbwcEapakA:10 a=WkljmVdYkabdwxfqvArNOQ==:117 reip=0.000, cl=1, cld=1, fgs=0
Quoting Lee Daniels <>:
> I assume there's a use for which they're ideally suited - what would that be?

Umm, sanding concave curves... 

I use similar items frequently on woodworking projects. If you can use 
one hand to hold the project piece and the other to move the drill 
press spindle up & down you'll get an even finer finish. I also made an 
auxillary table with a hole in it so the sanding drum can project below 
the surface slightly - that way the entire edge gets sanded without 
having the sanding drum contacting the table. 

Eric Russell
Mebane, NC

<Prev in Thread] Current Thread [Next in Thread>