shop-talk
[Top] [All Lists]

Re: [Shop-talk] DannMar MaxJax ?

To: shop-talk@Autox.Team.Net
Subject: Re: [Shop-talk] DannMar MaxJax ?
From: eric@megageek.com
Date: Sat, 30 Apr 2011 09:52:24 -0400
I can't agree more with Eric's comments (maybe us "Eric's" think alike!)

The real rub here is that the capacity is only 6000lbs.  I guarantee you 
that you will have stuff that you want to put on it but can't.

My lift is 12,000 and I find that I want to get a bigger/heavy unit!  8>) 
My lift was $2,400 delivered to my door.

Plus, the actual lift height isn't that impressive. 

Lets not forget that you have two hydraulic lines that are in your way if 
you are trying to roll a tool box around or something.

Most importantly, think about this, YOU will be under that car.  Do you 
want to worry about it falling?  I know that I am much happier with a lift 
that is only operating within 30% of it's limits, than one that is at near 
capacity.  Plus, each time you need to make sure you torque the bolts 
correctly.  After a while, I would image the bolts would be stretched and 
no good.  Cars and lifts can be replaced, you can't. 

If you are near NJ, I'll be happy to come over and help with the install 
of a real lift.  They are much safer.  I'll even bring my hammer drill and 
fork lift! 8>)


Moose (who was name "Eric" at birth.)  8>)
"Be as beneficent as the sun or the sea, but if your rights as a rational 
being are trenched on, die on the first inch of your territory." Ralph 
Waldo Emerson 




"Eric J Russell" <ejrussell@mebtel.net> 
Sent by: shop-talk-bounces@autox.team.net
04/30/2011 09:34

To
<shochschild@att.net>, "shop-talk" <shop-talk@autox.team.net>
cc

Subject
Re: [Shop-talk] DannMar MaxJax ?






Browse around on the Garage Journal forums for more opinions.
http://www.garagejournal.com/forum/

I'd ask, do you not have the ceiling height for a 'regular' lift? A quick
look at the link you provided indicates the posts still need to be bolted
down. They make it look like it takes 0.8 seconds to remove those bolts to
then allow you to move the post. I suspect it won't be quite as quick &
easy... Also, check the concrete flooring requirements for any 2 post 
lift. 
A standard residential garage floor may not meet these requirements.

IMO, if you want a 2 post lift and have the ceiling height, a regular lift
will not cost more & might be more useful. It won't be 'mobile' but if 
that
is your main criteria then consider a scissor lift. The problem with 
scissor
lifts is they drastically restrict access to the underside of the vehicle.

I bought a 4 post lift. I use it for both storage (parking one car above 
the
other) and for working on/under a car. A 2 post lift is ideal for working 
on
a car but not for storage.

Eric Russell
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>