Randall,
I've got a set of these like Ebay Item number: 280457849471
Would that suit your pupose?
Greg Gelhar
Osseo, MN
> Subject: [Shop-talk] Funny wrench request
>
> A 'normal' box-end wrench generally has the handle attached at the top of
> the box section, so that some fraction of the wrench sticks out like a
> socket does. Eg, the RH side of
> http://tinyurl.com/2enreg8
>
> What I'm looking for is a ratcheting wrench that has a similar offset.
> Anyone know of something like that?
>
> The situation is a nut on a stud, with only about 1/2" clearance from the
> end of the stud to a nearby frame member. The nut holds a flanged plate,
> where the flange sticks up to cover about 2/3 of the nut, so an ordinary
> "flat" GearWrench doesn't get a very good grip. An ordinary box end
wrench
> will work, but is somewhat tedious ... Ok, I'm getting lazy in my old age!
>
> So far, this is all I've come up with:
> http://tinyurl.com/24eflsk
> which would do, but I'm hoping the listerati will know of some
alternatives.
>
> -- Randall
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|