I need to disassemble some pvc tubing on a swimming pool filter system. right
now the tubing is permanently plumbed to the filter. when I cut the lines to
remove the filter, I'd like to be able to install something that will let me
disconnect the filter again for service later without cutting the pipe. I was
thinking something like what you connect a p-trap with, only larger, but I
don't see anything like that.
does anyone know of such fittings? I cruised the big box stores and didn't see
anything--only repair sleeves for gluing. it's about 2-inch pvc tubing, for
what it's worth.
also, anyone know a good abs glue/sealant (separate issue). the filter body
itself is made of what appears to be abs and a 1.5" threaded plug in the body
has developed a crack. I haven't been able to find another one and the company
that makes the filter has been bought out. I'd prefer not to buy a new filter
just for the plug.
thanks.
scott
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|