Can a Rotabroach (annular cutter) be used in something
other then a Rotabroach machine (mag base drill),
IE: milldrill, drill press, hand held drill motor, etc.?
chad
Nick Brearley wrote:
>Chris Kantarjiev wrote:
>
>
>>I'll second that - I have a set of these (then called Rotabroach, but
>>the same item) and they're really great. Not sure they work as well as
>>a unibit on some materials - I have both. The unibit gives a wider
>>range of sizes, but won't work on thick stuff. The rotacut can wander
>>a bit.
>>
>>
>>
>>
>Important to centrepunch the hole well and keep the Rotacut centreguide
>sliding freely. A little cutting oil works wonders. The fullsize
>Rotabroach machine is a very impressive piece of kit when you see it
>clamped in the middle of a large sheet cutting a two inch hole effortlessly.
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>You are subscribed as chad@linuxeg.com
>
>Shop-talk mailing list
>
>http://autox.team.net/mailman/listinfo/shop-talk
>
>http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|