shop-talk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Shop-talk] powder coat systems

from [Chadwick E. Labno] [Permanent Link][Original]
To: Mike Rambour <mikey@b2systems.com>
Subject: Re: [Shop-talk] powder coat systems
From: "Chadwick E. Labno" <chad@linuxeg.com>
Date: Mon, 17 Sep 2007 02:02:38 -0400 
There's an oven building forum at:
http://forum.caswellplating.com
I came across it when I was concidering
building a heat treating oven but "cooled"
on the idea.
chad
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Shop-talk] powder coat systems, Mike Rambour
Next by Date:  Re: [Shop-talk] Cars, EFi, snog controls and what not, John Innis
Previous by Thread:  Re: [Shop-talk] powder coat systems, Mike Rambour
Next by Thread:  [Shop-talk] Oetiker clamps, John Miller
Indexes:  [Date] [Thread] [Top] [All Lists]