shop-talk
[Top] [All Lists]

Re: [Shop-talk] Metric Hardware

To: tigers@autox.team.net
Subject: Re: [Shop-talk] Metric Hardware
From: "Randall" <tr3driver@ca.rr.com>
Date: Fri, 6 Jul 2007 17:06:06 -0700
> It's actually more complicated than that, though.  The bolts that we
> call "Whitworth" on our LBCs aren't really.  They're British Standard
> Whitworth (BSW), or British Standard Fine (BSF).

Except the ones that are British Association (which on a TR3 is the majority
of the "Whitworth" threads).

>  So a 1/4-20 whitworth bolt has a head that you'd
> find on a 5/16 BSW or BSF bolt,

Are you sure about that ?  My understanding is that a 1/4 BSW bolt has a
larger head than a 1/4 BSF bolt. 
IOW, BSW is effectively the same as the earlier "Whitworth" (in much the
same way as UNC is the same as NC).

See, for example,
http://www.internationalcockpitclub.org.uk/articles/article_threads.htm

Randall 
(Tedious but unavoidable disclaimer follows) 






CONFIDENTIALITY. This electronic mail and any files transmitted with it may 
contain information proprietary to NavCom Technology, Inc., or one of its 
affiliates, and are intended solely for the use of the individual or entity to 
whom they are addressed, shall be maintained in confidence and not disclosed to 
third parties without the written consent of the sender. If you are not the 
intended recipient or the person responsible for delivering the electronic mail 
to the intended recipient, be advised that you have received this electronic 
mail in error and that any use, dissemination, forwarding, printing, or copying 
of this electronic mail is strictly prohibited. If you have received this 
electronic mail in error, please immediately notify the sender by return mail.
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>