> It is my understanding that POR-15 (and some other similar products) are
> not UV stable. They change from black to "ugly" if exposed to the
> sun. Check into this before you do an outdoor gate, unless you're
> planning on topcoating with something else.
Friend of mine gave a talk at the club just last night ... he said that when
topcoating POR-15, you *must* either sand the surface (which he said is a
pain, the stuff is really hard once it sets up) or use their special primer.
Otherwise, the topcoat won't adhere and will eventually peel and flake off.
Randall
|