Hi Al & All
Good deal, good demonstration. I used an 3/4 end cutting wire brush with a
1/4 drill extension in the hinge area. Your Method of using screws on the
window fuzzys is outstanding eliminating those stupid staples. I used the #4
countersunk head screws 3/8" long I found at the Tru-Value hardware. I am
using this method on the Wife's Camaro, a job I had been dreading, but is a
snap with screws.
Lee
----- Original Message -----
From: "Alan Horvath" <alan@alanhorvath.com>
To: <oletrucks@autox.team.net>
Sent: Sunday, June 20, 2004 7:32 AM
Subject: [oletrucks] New Door Rubber Seals
> Hey, all
>
> I put the n
ew door rubber on my truck this weekend ... FINALLY, a
> success story to tell!
>
> Chevy Duty RULES! This rubber is perfect -- my doors close beautifully
> ... no more wind blowing and whistling around the doors ... and no more
> rattling!!!
>
> Here's the full scoop for those who are interested:
> http://www.alanhorvath.com/54chevy/doorubber.php
>
> Alan
> http://AlanHorvath.com/54chevy/
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|