No, not an idiot, just human like most of the rest of us...
----- Original Message -----
From: "Phil Maurey" <sz6vgh2@comcast.net>
To: "Gary Perry" <glperry@fwi.com>; "Oletrucks" <oletrucks@autox.team.net>
Sent: Saturday, June 07, 2003 8:57 PM
Subject: Re: [oletrucks] Head Removal
Does everyone think I am an idiot? Of course I made sure ALL of the bolts
are out. I will just keep trying, prying, and
pulling......................Oh, well would you look at that, two bolts
hidden under a bunch of sludge. Let's take those out and..........boy, pops
right off.
Don't I feel stupid!
Thanks to G.L. Grumpy and Dave for stating the obvious and being 100% right.
Thank you
Phil Maurey
1941 Chevy 1/2 Ton
http://mywebpages.comcast.net/sz6vgh2/1941
----- Original Message -----
From: "Gary Perry" <glperry@fwi.com>
To: "Phil Maurey" <sz6vgh2@comcast.net>; "Oletrucks"
<oletrucks@autox.team.net>
Sent: Saturday, June 07, 2003 11:27 PM
Subject: Re: [oletrucks] Head Removal
> Not to say your dumb here or anything, BUT, you DID do the head bolts
under
> the valve cover and down in some lower spots there, correct? You also have
> to remove the oil line from some rocker assemblies depending on what year
> you have. You will need to remove the side cover to see the coupler and
> small line. I'ld check for a missed bolt somewhere. You have shop manual?
> Look in it for bolt tightening sequence and it will show all the bolts,
and
> see if you hve them all out. The head will stick some, may need to "pop"
it
> loose with a prybar or screwdriver against something you won't damage on
> block.
>
> G. L. Grumpy's
> Old Iron Ranch
> Huntington, IN 46750
> AD trucks and MM tractors
> ----- Original Message -----
> From: "Phil Maurey" <sz6vgh2@comcast.net>
> To: "Oletrucks" <oletrucks@autox.team.net>
> Sent: Saturday, June 07, 2003 4:40 PM
> Subject: [oletrucks] Head Removal
>
>
> > I am tearing down my 235 and I have having a really difficult time
getting
> the head to break loose from the block.
> >
> > Any suggestions?
> >
> > Thank you
> > Phil Maurey
> > 1941 Chevy 1/2 Ton
> > http://mywebpages.comcast.net/sz6vgh2/1941
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|