I second the plug for Chevy Duty and BowTie Bits. I learned of Chevy Duty
first and bought most of my parts from them. Never had a problem at all.
Then I learned of Bow Tie Bits from this group and have bought soem used
exterior trim for the doors. Excellent used quality and the packaging was
excellent.
Dan Jacobsen - PA
'49 3100 327/powerglide
'55.1 3100 rodstoration 350/700 MII (in Progress)
'55.1 3600 Original
'51 6400 Deluxe Cab on '87 chassis
'35 Dodge Business Coupe - All original
>From: "chuck clark" <cachomeimp@hotmail.com>
>Reply-To: "chuck clark" <cachomeimp@hotmail.com>
>To: mgtrautoxr@sprintmail.com, SnotMe80@aol.com, oletrucks@autox.team.net
>Subject: Re: [oletrucks] upset with jim carter's service and need a new
>parts place
>Date: Wed, 28 May 2003 08:52:11 -0400
>
>I used chevyduty a lot on my rebuild and really liked them. Also try Jeff
>at Bowtie Bits. He has a lot of good tech. info and is accessible. His
>prices are in line with all the others. His # is 1-888-838-6887. I
>discovered Bowtie after I had almost finished my truck. Wish now I had
>discovered them before that.
>
>
> >From: mgtrautoxr@sprintmail.com
> >Reply-To: mgtrautoxr@sprintmail.com
> >To: SnotMe80@aol.com, oletrucks@autox.team.net
> >Subject: Re: [oletrucks] upset with jim carter's service and need a new
> >parts place
> >Date: Wed, 28 May 2003 04:40:16 -0500 (CDT)
> >
> >You might try ChevyDuty. The parts that I have got from them so far are
> >good (of course they are only 1/2 mile from where I work so it is easy
>just
> >to pick up stuff on my way home!). They also have a nice show room - but
>I
> >almost hate going in there since they have so moany nice parts on display
> >that it makes you want to buy them!.
> >
> >Kevin '49 Chevy 3600 Wrecker & '51 3100
> >-------Original Message-------
> >From: SnotMe80@aol.com
> >Sent: 05/27/03 09:29 PM
> >To: oletrucks@autox.team.net
> >Subject: [oletrucks] upset with jim carter's service and need a new parts
> >place
> >
> > >
> > > i placed an order for the offenhauser double carb intake manifold for
>my
> >261
> >and i called after two weeks to see were it was at because they had not
> >told
> >me it was back ordered or anything. so the lady says we will be shipping
> >them
> >out tomorrow and so another week goes by and still no intake so i call
> >back
> >again and she says it was shipped out to someone else by mistake and that
> >i have
> >to wait for the other person to ship it back so they can reship it to
> >me-now i
> >am a little upset but remain calm on the phone and ask the lady to care
>of
> >me
> >in some way- a slight credit or some free other parts or something to
>make
> >up
> >for it. she says she will check and get back to me so she comes back and
> >says
> >there is nothing she can do and i told her i was going to give them one
> >more
> >chance to make it right or i would find another parts source and she told
> >me
> >to go ahead and find another parts source then. so i am done with jim
> >carter
> >and need some recommendations for some new parts places.
> >thanks
> >Rob
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
>_________________________________________________________________
>MSN 8 with e-mail virus protection service: 2 months FREE*
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|