oletrucks
[Top] [All Lists]

Re: [oletrucks] speedometer dilemma continues

To: "Majordomo" <oletrucks@autox.team.net>
Subject: Re: [oletrucks] speedometer dilemma continues
From: "K. M. Lehmann" <klehmann@bentonrea.com>
Date: Fri, 16 May 2003 08:38:00 -0700
Karen
If The part on , with square hole does not move, can be a good sign maybe,
now jack up one back wheel, have someone turn it by hand while you watch to
see if thing with the square hole is turning. If not turning remove bullet
thing and see why.
Lee
----- Original Message -----
From: "Duff Karen ES-19 103 FW/EM" <Karen.Duff@ctbrad.ang.af.mil>
To: <oletrucks@autox.team.net>
Sent: Friday, May 16, 2003 7:55 AM
Subject: RE: [oletrucks] speedometer dilemma continues


> Lee
> there is a square hole that has not been rounded off on the bullet looking
> thing I removed from the outside of the transmission to accept the cable,
> when i put the cable in though, nothing turns..maybe it needs more then my
> two little fingers to get it to move...
>
> -----Original Message-----
> From: K. M. Lehmann [mailto:klehmann@bentonrea.com]
> Sent: Friday, May 16, 2003 10:20 AM
> To: Majordomo
> Subject: Re: [oletrucks] speedometer dilemma continues
>
>
> Karen
> Is the part there, on the bullet looking thing, that has the square hole
in
> it to accept the cable end?
> Lee
> ----- Original Message -----
> From: "Duff Karen ES-19 103 FW/EM" <Karen.Duff@ctbrad.ang.af.mil>
> To: "Oldchevytrucks (E-mail)" <old-chevy-truck@yahoogroups.com>;
"oletrucks
> (E-mail)" <oletrucks@autox.team.net>
> Sent: Friday, May 16, 2003 6:09 AM
> Subject: [oletrucks] speedometer dilemma continues
>
>
> > I inquired previously about how to fix my speedometer, here are the
> results:
> > the cable is fine, the gauge is fine, BUT when i removed the speedometer
> > connection from the transmission and pulled it out...I noticed there was
> no
> > gear on the end of it, and really i'm clueless as to how this thing
> > works...(i know.. clueless about how anything on the truck works)....but
> > first explain to me how it works, i know how the cable goes in, but it
> will
> > not spin...and if it did spin, how did it move the gear that was
supposed
> to
> > be on the end of this thing?  Nothing on what i removed moves.... and if
> it
> > is broken, can i just buy a new one?
> >
> > Karen Duff
> > 53 3100
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>