Lee
there is a square hole that has not been rounded off on the bullet looking
thing I removed from the outside of the transmission to accept the cable,
when i put the cable in though, nothing turns..maybe it needs more then my
two little fingers to get it to move...
-----Original Message-----
From: K. M. Lehmann [mailto:klehmann@bentonrea.com]
Sent: Friday, May 16, 2003 10:20 AM
To: Majordomo
Subject: Re: [oletrucks] speedometer dilemma continues
Karen
Is the part there, on the bullet looking thing, that has the square hole in
it to accept the cable end?
Lee
----- Original Message -----
From: "Duff Karen ES-19 103 FW/EM" <Karen.Duff@ctbrad.ang.af.mil>
To: "Oldchevytrucks (E-mail)" <old-chevy-truck@yahoogroups.com>; "oletrucks
(E-mail)" <oletrucks@autox.team.net>
Sent: Friday, May 16, 2003 6:09 AM
Subject: [oletrucks] speedometer dilemma continues
> I inquired previously about how to fix my speedometer, here are the
results:
> the cable is fine, the gauge is fine, BUT when i removed the speedometer
> connection from the transmission and pulled it out...I noticed there was
no
> gear on the end of it, and really i'm clueless as to how this thing
> works...(i know.. clueless about how anything on the truck works)....but
> first explain to me how it works, i know how the cable goes in, but it
will
> not spin...and if it did spin, how did it move the gear that was supposed
to
> be on the end of this thing? Nothing on what i removed moves.... and if
it
> is broken, can i just buy a new one?
>
> Karen Duff
> 53 3100
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|