Yes, the original ammeter will work with no modifications. The gas gauge
has no "dampening" designed into it (like most of today's) & will also
respond to voltage changes.
Regards,
Doug Pewterbaugh
dpewter@msn.com
Denton, TX
49 3104 216 5-window
----- Original Message -----
From: <Louk2@aol.com>
To: <oletrucks@autox.team.net>
Sent: Monday, September 02, 2002 10:47 AM
Subject: [oletrucks] Guage questions
> Hi all,
>
> I have a couple questions about the use of the original 51 (3100) gauges
> after a 12Volt upgrade.
>
> 1. Will the original Amp meter work after converting to 12V?
>
> 2 Using the original fuel tank float and gauge (with a 12 to 6V reducer)
my
> fuel gauge works fine until I start the engine (305) I then get a very
shaky
> needle especially after taking my foot of the accelerator.
>
> Any suggestions?
>
> Thanks
>
> Lou
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|