oletrucks
[Top] [All Lists]

Re: [oletrucks] bedwood milled rabbets

To: oletrucks@autox.team.net
Subject: Re: [oletrucks] bedwood milled rabbets
From: Don Kasbohm <milw8170@dmci.net>
Date: Mon, 15 Feb 1999 18:52:16 -0500
Ok, here's yet another question on this thread. Is there a router bit
available to cut these into a new board! Thanks!
Don Kasbohm
'59 GMC 100 V8


<Prev in Thread] Current Thread [Next in Thread>