Ben,
I'm a bit confused...do you mean to say that turning the input side of the
angle drive gearbox produces nothing on the output side? But, turning the
output side of the angle drive gearbox produces turning on the input side?
Strange..My gearbox broke recently and would work at all. I had Nissonger
(914) 381-1952 rebuild the box . It's not something easily done without the
proper tools. Also, you need to determine why the cable and gearbox broke
....maybe the speedo is locking up. Nissonger can also check it as they
rebuild speedometers. Good luck.
Regards,
John
59 4/4
From: "Hodgkiss, Ben" <bhodgkiss @ herefordshire.gov.uk> on 07/15/99 01:38
AM PDT
To: morgans @ autox.team.net@SMTP@Exchange
cc:
Subject: Speedo Drive
Dear All,
I recently replaced a broken speedo cable on my 1972 4/4. The speedo still
wasn't working, and further investigation indicated that the device putting
the drive through 90% into the gearbox is the problem. Turning the gearbox
output end of the device produces no turn in the cable, yet turning the
cable turns the gearbox output end. Has anyone any idea:
(a) what's causing the problem
(b) how to dismantle the thing
Many thanks for any help
Ben
|